Egr and fubar

Steven Papatrefon thepep@worldnet.att.net
Wed, 10 Jul 2002 07:08:29 -0500


From: "George Roffe" <geo3@earthlink.net>
To: "hlava" <lhlvava@tampabay.rr.com>; <se-r@lists.deskmedia.com>
Sent: Wednesday, July 10, 2002 7:58 AM
Subject: RE: Egr and fubar

> It's easy.  Just bite the bullet.  It will be easier than the dinking
> around you're doing now.

> Mark the position of the distributor and remove it.  You will need to put
> it back to the same position when you reinstall it.

> Two bolts removes the tube from the intake manifold.

> One big-ass nut attaches it to the exhaust manifold.

Unless you had an ass install your header and he stripped that "big-ass nut"
like on mine.

Steve Papatrefon
'92 NX w/ new knock sensor