3m WINDOW WELD & brake pads

[Chris Pronios]

Since everyone "chips" in here is my take:

I have a 92 N14 Sunny. Changed passenger-side motor mount. For ordering I
used the Part# from SE-R.NET which is for the B13 classic.

Results:

1. My old mount (same part# as new one) WAS liquid filled.
2. New one I don't know since it is not time for "surgery" yet.
3. The hole on the top has nothing to do with the liquid. After cutting the
steel sleeve that is embedded in the aluminum mount, I used the hole as and
knocked the frame out of the mount. Grey material that can be seen blocking
the innards of the hole is the paste/glue used to hold the steel sleeve on
the frame.

Chris