B13 Pads on B14 (was Re: NX2000 rear brake pads)
Raymond A. Kawski
sr20de@epix.net
Tue, 18 Dec 2001 15:26:09 -0500
Lawrence Weeks wrote:
> That's right, they are the same calipers and pads.
This reminds me of something I found out. The rear pads on the B14
are slightly bigger, 1/16" or so. No-one has been able to find me
rear metal master pads for the B14.
I had heard you could use B13's on a B14. So I ordered a set. Only
problem was that when ever you put your foot on the break that
1/16" allowed the pad to travel causing a "clicking" sound to
be heard. The pad moving around in the caliper.
I thought it was because I had tossed the shims at the track the
one time. So I bought new shims. Didn't solve the problem because
it wasn't the shims fault it was the pads were to small.
So I took my handy dremel and trimmed up an old shim and put 2 shims
on the bottom of the caliper. No more clicking!
Also if you order a new shim kit and you put the dust shields that
go in the caliper you need to bend a slight curve into them otherwise
they rub the rotors. We found that out on Armando's car the
hard way. I put the new shims on my car and the same thing
happend. So before I put the wheel back on I tested it and
it was rubbing. Pulled it off and bent it a little. And now
its fine.
RK