Factory G-Meter!

[Martin]

I'd start by checking the sender behind the head, its the small one.  The spade connector on the sender will start working its way loose and cause issues like yours.  

Maybe the wiring moves just enough to tug on the connector when you're "bending corners"  ;)


Martin G



--- On Tue, 9/15/09, Greg Amy <grega at pobox.com> wrote:

> From: Greg Amy <grega at pobox.com>
> Subject: Factory G-Meter!
> To: se-r at se-r-list.org
> Date: Tuesday, September 15, 2009, 6:39 PM
> I seem to have a factory-installed
> g-meter in my NX2000: every time I do "spirited"
> acceleration, the water temp gauge droops downward to the
> bottom; when I let off the loud pedal it goes back to
> normal. Any "normal" accel and there's no change. It's not
> related to either speed or RPM, just longitudinal g-load.
> 
> I'm expecting a wiring issue, but figured I'd ask before I
> went digging in case this is a common problem... - GA
> +----------------------------------------------------------------------+
> The mailing list home page is http://www.se-r-list.org/
> To modify your subscription, go to http://www.se-r-list.org/mailman/listinfo/se-r
>