synchro-mesh gearsets

[Josh Palmer]

I found a link for high HP FWD SR20DE gear boxes,
only problem is that it's a full dog gearset.
A listmember on that site, skiddusmarkus, said he
put this link on a US SR20DE site in July 2002,
so maybe this was posted before.
The link also explains a bit bout the differences
between full dog, 1/2 dog and straight cut gears.

http://www.timwright.co.uk/gtir/topic.asp?TOPIC_ID=461

"A dog gearset for the FWD SR20DE, priced at $4000 AUD."
($2176 US, today's rates, bloomberg.com)

"The FWD SR20DE full dog box is the thing to have when you have turboed the
N/A SR20DE or have installed a U12 Bluebird/U13 Bluebird/GTi-R turbo engine
into your FWD Pulsar, Sentra, SE-R, NX Coupe (or anything with a FWD
SR20DE). The dog gearset is made from EN36A case hardening alloy steel which
is hardened and tempered through a special heat treatment process after the
manufacturing stage. This is a dog (1st to 4th gear) gearset with straight
cut gears and will handle all the power your engine can supply. The dog
gears are rated at around 600hp."

Josh Palmer
'93 SE-R (mailing list on digest mode)
Materials Mgr / MIS Mgr / Estimator
Quality Machining Inc (www.qmiwi.com)
1001 Uniek Dr.
Waunakee, WI 53597
608.849.8057 Voice
608.849.8957 Fax