3M window weld and Cure Time

[Ben Davis]

> Here is my recommendation- for repair torn/worn motor mounts, 3M weld is a
> good choice if you vibrations scare you to death. If you want "racing"
> mounts as an alternative to ES inserts, JWT or PR mounts, with torn/worn
> mounts or not, use the 94 shore urethane.

To add to this, I do recommend the 94 shore over the ES, JWT, and PR mounts.

They are better than the ES mounts because:
1. $24.04 for all 4 is a bit cheaper than all 4 for ES's stuff. You could do
at least 2 sets of mounts if not 3 or 4. It's been a while since I used the
stuff to remember how much was left, but I don't think I even used half of
what comes for $24.04 on all 4 mounts.
2. It is MUCH easier to install. Remove mounts, duct tape or plastic wrap or
whatever one side of the mount to hold the urethane in while it's liquid,
pour, let cure.

They are better than the JWT and ES mounts because:
1. $24.04 is TONS cheaper than the $250 of whatever these guys charge. And
again, you can do many sets of mounts in 1 pop if you wish, so multiply that
savings if you do several mounts.

Ben Davis
92 Sentra SE-R