GC C/C Plate install questions

[Steve Foltz]

>    1. there really isn't much you can do with that tube. i tried tweeking
>it
>a little then wrapping it with electrical tape where it contacts the plate.
>if it continues rubbing on the plate it will wear a little spot in the soft
>aluminum.:-)

Here is another idea.  Take the rubber washers isolators out of the gold
metal holder.  Wrap them around the tube.  There is a grove all the way
around that you can slide a zip tie in.  Tighten it down.  Use two rubber
isolators and it wont rub anywhere.

Steve