Rear suspension; window cranks
Christopher Scarpulla
cscarpulla at gmail.com
Sun Apr 8 18:30:36 EDT 2018
The trick to the torsion bars is to replace them when they're not in
tension, which is with the trunk closed, or close to closed. Lay on your
back in the trunk with your legs hanging out over the bumper, and you'll
figure it out from there.
C
On Sun, Apr 8, 2018 at 4:58 PM, David Pertuz <d.pertuz at gmail.com> wrote:
> Dude, that's a great tip. I just hit the handle that's off the car with my
> heat gun and after a few minutes it's about 90% as good as new. It's a bit
> tricky to heat it up enough but not too much that you start softening the
> texture molded into t.
>
> So anyone done rear suspension in recent years?
>
> Also: tips to get the trunk torsion bar back in? I had to do this and
> replace a hinge years ago and it sucked. Then, years ago, one of the
> torsion bars popped out again and I've spent ages opening the trunk as a
> two-man or two-step operation, which is a pita. I seem to recall you have
> to insert the fixed end then twist it about 90 degrees to get et the other
> end seated, which is kind of hard without a helper, or shutting yourself in
> the trunk.
>
> David
>
>
> On Sunday, April 8, 2018, Ray Kawski <rkawski at e-rak.com> wrote:
>
>> I have a PDR friend who pulled all my dings before I drove to Florida
>> with my NX2000. I pulled the door panels to put new speakers in and for
>> him to get to some dings easier and he saw the door handles and did it to
>> mine and I was like WHOA!!!
>>
>> RK
>>
>> On Apr 8, 2018, at 11:40, David Pertuz <d.pertuz at gmail.com> wrote:
>>
>> Huh! Never joe have guessed that. I do have a heat gun, so I'll try that.
>> Thanks!
>>
>> David
>>
>> On Saturday, April 7, 2018, Ray Kawski <rkawski at e-rak.com> wrote:
>>
>>> David wrote:
>>>
>>> > Anyone have a pair of window cranks that haven't turned white-ish?
>>> This is the only thing in the interior that bugs me now.
>>>
>>> Got a heat gun? Lightly heat them with the heat gun and they will turn
>>> back to the correct color. Don’t get too close or you will have mush.
>>>
>>> RK
>>
>>
> +----------------------------------------------------------------------+
> The mailing list home page is http://www.se-r-list.org/
> To modify your subscription, go to http://www.se-r-list.org/
> mailman/listinfo/se-r
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://se-r-list.org/pipermail/se-r/attachments/20180408/dac344f8/attachment.html>
More information about the se-r
mailing list