Inexpensive Rocker Arm Source?

[Brent Meints]

Rock Auto has them for $15 a piece, they are not OEM units though.


On Wed, Jul 30, 2014 at 9:41 AM, Erik Halvorson <hammer_down at hotmail.com>
wrote:

> So, the low budget rebuild on the running SR20DE engine with a "tap" noise
> (from my Father's 92), for my Daughter's NX2k just got a bit more
> expensive. At some point in it's life, (I am betting prior to my Father
> since vehicle maintenance is one of those things he is very anal about),
> the oil was run LONG between changes. It coked up and then with each oil
> change there after the varnish/coke sloughed off and clogged the cam lobe
> oil squirters. The Cam lobes are all worn down quite a lot and the rocker
> arms have valleys in the convex curve sliding surfaces. So the source of
> the "tap" now reveals itself.... :^(
>
>
>
> Does anyone have an inexpensive source for rocker arms? Courtesy has them
> for $22.85 ea ($185.80/set) and maybe that is the best I can do.
>
>
>
> I found 2 good stock cams in my pile-O-parts, so I am good there, but all
> my used rocker arms show too much wear for me to have that good feeling if
> I used them for reassembly...
>
>
>
> Let me know,
>
> Erik
> +----------------------------------------------------------------------+
> The mailing list home page is http://www.se-r-list.org/
> To modify your subscription, go to
> http://www.se-r-list.org/mailman/listinfo/se-r
>



-- 
Regards,

Brent Meints

Mobile: 859-488-1048
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.se-r-list.org/pipermail/se-r/attachments/20140730/ca586548/attachment.html