High port to low port swap, wiring harness?

[Brent Meints]

You need to use the highport distributor and ignitor.  You also want
to use the highport temp sensors and accessories (power steering
pump).  Then use the highport ECU harness and the highport fuel
injector harness.  Everything else is a swap over really.  This is
very straight forward.

Brent

On Wed, Jan 11, 2012 at 12:39 PM, Jim Wright <wrightj at apple.com> wrote:
> Hey Martin.  We're looking at a straight SR20DE swap, no VE, no Turbo.  Are you saying with any Low Port swap that we'd need to keep the High Port distributor parts and swap those over?  I don't think I had come across that tidbit before.
>
> Jim
>
>
> On Jan 11, 2012, at 11:23 AM, Martin wrote:
>
>> You'll need to use your HP distributor set up.  If you can swap a LP VE in a B13, this should definitely be doable.
>>
>>
>>
>> From: Grover Pickering <groverpickering at gmail.com>
>> To: Jim Wright <wrightj at apple.com>
>> Cc: se-r list <se-r at se-r-list.org>
>> Sent: Tuesday, January 10, 2012 6:56 AM
>> Subject: Re: High port to low port swap, wiring harness?
>>
>> Based on what I read - and my extremely limited technical knowledge - this is what the answer seems to be....
>>
>> Swap should work
>> Some sensors may need to be swapped over if the sensor connectors don't match (i.e. water temp)
>> Throttle cable may need some work/"engineering"
>> Looks like swapping HP cams into LP engine is a good thing.
>> May have some extra wire on a couple of sensors
>>
>> Anyone of you smart folks have anything to add?
>>
>> Grover
>>
>>
>> On Mon, Jan 9, 2012 at 12:46 PM, Jim Wright <wrightj at apple.com> wrote:
>> Hey, throwing this back to the list again, has anyone done a swap this direction?  Any gotchas to worry about?
>>
>> Jim
>>
>> On Oct 19, 2011, at 3:44 PM, Jim Wright wrote:
>>
>> > Can anyone definitively answer if a high port wiring harness will work with a low port SR20DE swap?  I've got a '91 B13 with a blown engine, high port, and have a low port replacement.  Other than moving sensors and such over, and maybe undoing a few zip ties to free up cable slack, should this work?
>> >
>> > Most of the swaps I've come across in my reading have gone from low to high.
> +----------------------------------------------------------------------+
> The mailing list home page is http://www.se-r-list.org/
> To modify your subscription, go to http://www.se-r-list.org/mailman/listinfo/se-r