CV joint help!

[Eric Waterman]

If you lift the car high enough, you won't have to drain the transmission.

On 7/13/11, wc701lists at bellsouth.net <wc701lists at bellsouth.net> wrote:
> Yup, what Eric said.  And a deep-well 14mm if you need to remove the
> sway bar (might get away without.)  1/2" square drive (end of ratchet)
> to remove the tranny drain plug, and 3/8" square for the fill, and a
> funnel.
>    -wayne
>
> On 7/13/2011 10:58 AM, Eric Waterman wrote:
>> You need a 32mm for the axle nut, 17mm wrench and socket for the lower
>> strut bolts and a 21mm for the wheels.  You might need a pry bar to
>> remove the axle since they can be stuburn sometime.
>>
>> Eric Waterman
>>
>> On 7/13/11, Jeff Hager<submarinesammy at yahoo.com>  wrote:
>>> I have a quick favor to ask. I have a B14 with a broken driver's side CV
>>> joint. I have limited tools and need to know what tools I need to bring
>>> to
>>> pull the axle. Does anyone know off the top of their head what tools I
>>> need
>>> to bring?
>>>
>>> Thanks,
>>> Jeff
>>
>
> +----------------------------------------------------------------------+
> The mailing list home page is http://www.se-r-list.org/
> To modify your subscription, go to
> http://www.se-r-list.org/mailman/listinfo/se-r
>

-- 
Sent from my mobile device