Oil pressure and engine temps
Raymond Kawski
sr20de at e-rak.com
Mon Jan 16 13:27:58 CST 2006
On Mon, 16 Jan 2006 10:37:29 -0800 (PST), Khiem Dinh wrote
> A little lower would be expected, but not 0 psi and
> only 25 psi when cruising! When I was using 5w-30, I
> saw .6 bar at idle and 3 bar when cruising; so both
With my old setup I would see 0psi indicated at idle with my VDO gauges when
warmed up. Crusing at 3K was around 40psi or so with Mobil1 15w50. My new
setup I'm usually 15-20psi at idle and 50-60psi at 3K and close to 100psi
when cold.
> below the factory specs. My pressure gauge and turbo
> oil feed line are T'd at the stock sender location.
My old setup had the T 20" from the stock location with a restrictor located
at the T. My new setup has the restrictor located at the turbo. My point
is alot of things will affect oil pressure that may not indicate a real
problem with the motor.
RK
--
Raymond A. Kawski
More information about the se-r
mailing list