need help--what do these problems have in common?

[Tim Rogers]

Jon wrote:

 The car:
> 1. Wants to die/idle very low when clutch pushed in
> 2. Gas gauge drops to E from 3/4

Is the gas guage issue also occuring when the clutch is pushed in?
Sounds like a fuse / relay or shorting issue.

> 3. At one point, the clutch pedal stayed down on floor.  The driver had to
> pull it up with her foot,

Could be a frayed clutch cable.
Have them pull back the cable boot at the tranny end to check for loose
strands there and also check on the pedal side with the pedal pushed all of
the way in.

Jumping the clutch inhibitor switch is a good way to test if the switch is
bad.

Tim Rogers
'93 NX2K- Sapphire Blue, CAT Back, JWT S4's & ECU, Tokico/Eibach, JUN
Flywheel, P/R CAI, 15X7 Borbet Type H's.
'91 NX2K- White, SCCA ITA racecar-to-be
'91 NX2K- Black, parts car