finally boosting !

[olived@alum.rpi.edu]

April 03
I was the guy in the post. I ran a DE ECU (no AFC) at 7 PSI on a U13 w/
FMIC, 3 Bar FP, Test Pipe & 3 in cat back, Stock Pullies & cams. 202 WHP
& 193 TQ

Nov 03
Added 3 PSI (boost) and Walbro fuel pump. 210 WHP 212 TQ. After the
dyno, I went over the basics, (honestly thought I'd get more) and found
out the Walbro raised my base fuel pressure by 3 PSI. I have sine then
added a Nismo FPR and properly set my fuel pressure. So, in a nut shell,
on the pull with the JWT, my fuel pressure was off.

Doug