Mr. "Fix-One-Thing-Break-Lose-Two-Things"

[hlava]

Ok, this is standard for me, but I'm stuck. I've pulled lots of things out
of the engine bay in order to get to the EGR tube and throttle body.

I have a 24mm open end offset wrench to get the EGR bolt off... it keeps
slipping. I've pb-blasted the threads a number of times over the last 2
days, also.

I can't find anyone who sells as a single or even in a set a 24mm flarenut
wrench. Any other ideas to get something clamped on that bolt that'll work?
Honestly, at this point of frustration, I won't need the pb blaster to
loosen anything. I couldn't even find a crowfoot flarenut set that had that
size:(

I checked Harbor Freight, Home Depot, Lowes, Ace, and Sears... boo hoo for
me, neh?

I took the distributor off, too. Is it a bad sign when you see a little oil
in there? It was just a little oil and easy to wipe with a hand towel.

As always, thanks for your help and consideration,

Mark(Feeling like I've been riding the short bus to school)