Cam matrix

[Chris Pronios]

Mike,

after this statement, should I assume that, in general, shorter durations
are preferable for the same lift?

i.e. a 264-11.8mm cam is generally preferable to a 270-11.8mm?

And that the higher valve velocity achieved by the high lift at a lower
duration puts more stress on the valve spring?
i.e. a 264-11.8mm is more probalbe in need of uprated springs than a
270-11.8mm?

Chris

> This goes to show how JWT's grinds are superior, note
> the amount of lift to the duration.  JWT has the
> highest lift for the amount of duration out of all the
> cams.