Brake Problems

[Thomas Reynolds]

Jay wrote:
>I did an ad22vf install a few weekends ago, and found the same thing.
>Before it left the garage, though. :) In my case the flat spot on the
>caliper that the crush washer pushes up against was not flat. In order
>to repair the issue I had to take a hand file and file down about 1/16"
>in order to get a nice flat spot for the crush washer to sit on. Works
>great now.

I had the exact same scenario with my two remanned AD22VF calipers you
describe Jay back in 2000. Had to do the same thing to remedy the problem.

Thomas
'97 200SX SE-R
F-Max Stage II Turbo
Albany, GA