Crank Position Sensor

[sbaune@attbi.com]

Dave at Fidanza said to use a file to remove some of the material on the trans.
to get the sensor closer to the flywheel. That's why I wanted to know the
distance between the sensor and the flywheel. I'm going to try to measure the
distance from the outside of the sensor opening to the flywheel, then measure
the sensor to see how close it is. I should be able to compare this to my G20
to see the difference between the two.

Steve Baune
'96 200SX SE-R
'99 G20t
'90 RB20DET Powered 240SX
Eric Wrote:
> The FSm doesn't specify a clearance measurement.  I also remember there's
> not much room for adjustment anyway.