Front cover removal with motor in the car.

[Jay Whitely]

Just make sure U got it @ TDC
> compression on #1 cylinder,

***This doesn't really matter. The location of the
piston does not determine whether it is the
compression stroke or the exhaust stroke. The location
of the cams determines this. Just set the #1 piston
all they way to the top, TDC.It becomes defined as the
compression stroke once the cams are installed with
the lobes facing away from each other.

Count ur chain up like
> it says in the FSM,
> belive 21 is the # U are looking for.

***You want 20 rollers or links BETWEEN the dots
stamped into the cam gears.

Good luck,

=====
Jay Whitely
Tampa, FL
1996 200SX SE-R
GTi-R powered, F-MAX Stage 2