My QR25 is dying at 15k miles :(

Maurice Hilarius maurice@harddata.com
Fri, 27 Dec 2002 09:39:21 -0600


With regards to your message
>From: ratteber@speedfactory.net
>Subject: Re: My QR25 is dying at 15k miles :(

>I got a different impression reading the thread about J-spec vs.
>American-spec QR25 engines. It sounds like if you can get your rings to
>seat, the American engine will last longer because of the harder ring.
>You said you were running Mobil 1 oil. I'd think it would take forever
>for your rings to seat using a synthetic oil. I'd be using dino oil
>until the oil consumption was under control.

>Of course, I might have it all wrong.

>Ron Atteberry

I put Mobil1 in my SpecV QR25 motor at the first oil change, at roughly
2,000 miles.
Yes, it took a while to break in.
But, I have never had to top off the oil.
It has had 2 oil changes since, and both times the oil was at the top mark
on the dipstick.

With our best regards,

Maurice W. Hilarius       Telephone: 01-780-456-9771
Hard Data Ltd.               FAX:       01-780-456-9772
11060 - 166 Avenue        mailto:maurice@harddata.com
Edmonton, AB, Canada      http://www.harddata.com/
    T5X 1Y3
~...HAPPY HOLIDAYS...~