HELP w/ timing chain issue
Eric Waterman
sr20pwr@comcast.net
Wed, 21 Aug 2002 21:23:16 -0500
You might have had it at TDC for #4. If the distributor was 180deg off,
this sounds like what was happening. The crank will show 2 TDCs, 1 when #1
is at TDC, and the other for #4. Put the crank at TDC, then line the cams
up.
Eric Waterman
1996 200SX SE-R
1997 200SX SE-R
1991 Sentra SE-R
> I then
> rotated the rotor 180 degrees and it then slipped right in. F---k, the
cams
> were installed wrong!!! This is by a professional race company, no less.