TPS not reading 4 volts at WOT with JWT ECU

Steve Foltz stevefoltz@hotmail.com
Tue, 20 Aug 2002 12:42:24 -0500


>Raymond A. Kawski wrote:

>As for the 5V power supply apparently the TPS
>supply voltage is a super accurate thing and should not deviate
>from like 5.22 volts.  That is one of the reasons we found
>the problem because I had a low TPS voltage too.

Thats how I knew it was related to the ECU I had recently put in.  The 98
ECU registered a full 5.1volts where the 95 ECU was 4.25 or something.  Such
a simple solution to what looked like a real problem.  I always knew that
one day the se-r list would save my a$$ when I really needed it.  In the end
it was the information first generated by the list that did solve this
problem.  Thanks Ray.

Steve Foltz