BB DET/ JWT S4 cams idling problem.

SeattleSER@aol.com SeattleSER@aol.com
Sun, 21 Jul 2002 17:51:48 -0500


obert@snet.com replied:
<<I would crank up the idle screw so it will run with the tps disconnected.
My recommendation is to not set the idle by the factory tach, I had lots of
stalling problems when I did this setting it to factory specs using the tach
in a timing light fixed all my problems.>>

Hmm, so I can crank the idle up before disconnecting the tps to get it to
idle?  Never knew that!

Ugh, apparently I forgot my factory tach is kinda off after all the lil ricey
mods I did to it in the past(red indiglow needles and cf look guage faces).

Thanks for the help.

Nollan