JDM Engine Knock

[Brian Jones]

> Anyway, here's the issue.  There is a slight knock in
> my 10:1 SR20, and the ECU (standard US program) is
> giving a knock sensor code.

A knock code *MAY* mean that you were experiencing hard enough
Knock to break the knock sensor itself.  I would reset the ECU,
And drive around and see if you pull a knock sensor code again.
If you do, then it's the knock sensor that's bad or the wiring
Doesn't have any continuity.  If you get to the point where you
Have to replace the sensor...
1) It has only one wire going to it so don't be alarmed.
2) It's a son of a bitch to get to.
3) Its expensive :)

Good luck

-Brian Jones
93.5 G