3M window weld and Cure Time

[Ben Davis]

> Windo weld holds the best of the homemade stuff. It is made to "stick",
the
> poured urethane is not.

Well, then explain this. I removed all the rubber from a dogbone mount
leaving just the metal sleeves. I filled it in with just 3M window weld and
let it cure for a week. It did not stick in the mount well and it really
wasn't that hard. I'm not out for a pissing contest at all- I would just
like to continue this discussion.

I have since pulled the window weld from this mount. I have a full set of 4
mounts that I have removed the rubber from and, hopefully soon along with my
current 92 SE-R mounts, hope to fill them in with 94 shore urethane. The
ones with no rubber at all will just be nothing but 94 shore. I think I will
put these in my SR20 powered Geo Metro project since I will be doing it auto
SE-R style with no dogbone mount.

Ben Davis
92 Sentra SE-R (loving being a B13 driver again)
93 Metro with Swift GTi front brakes, 15" wheels, and an SR20 passenger side
axle in the hub