Dawes Device
Peter de Vries
dognuts@ozemail.com.au
Thu, 30 May 2002 20:24:47 -0500
>The downside is that the FDMBC is also a one way valve, so that any pressure
>built up at the wastegate actuator will not immediately go away except
>through leakage around the FDMBC ball. So you could run into a problem
>where the boost quickly decreases and only slowly comes back.
What you then do is install across it a one way valve which will vent the
pressure built up in the WG back into the manifold again.
Pete