Rodbearing Code Loaction; For Replacement (Thanks All)

[MJP]

First off, Thanks all that replied, you just clearified my assumption.

As Jay and Geo stated, there are grades, Not all are alike.

See FSM page: EM-120

Standard: (Grade Number/Thickness/ID Color or Number)

0 = 1.505 - 1.508 (0.0593 - 0.0594); No ID Color or Number
1 = 1.508 - 1.511 (0.0594 - 0.0595); Brown
2 = 1.511 - 1.514 (0.0595 - 0.0596); Green

Undersized:  (Grade Number/Thickness/ID Color or Number)

0.08 (0.0031) 1.542 - 1.546 (0.0607 - 0.0609); 8
0.12 (0.0047) 1.562 - 1.566 (0.0315 - 0.0617); 12
0.25 (0.0098) 1.627 - 1.631 (0.0641 - 0.0642); 25

The Engine has 80K on it.  The knock was slight and only noticeable at
startup.  It is my toy car so I figured it would just be a good Idea to
get in there, replace the Rod Bearings before they became a major
issue, the Main Bearing while at it, Belts, all the Fluids.. yadda
yadda.  Take Care guys, and talk to you soon.

Mike Palumbo
Orlando Florida

Ordering Rod bearing for the 96 SE-R Friday Morning. Poor thing is in
Rehab.  It's Dieing to get back out to the Track.

96 SE-R, All the go fast NA goodies.
2001 Jetta 1.8t (Wifee'keep'en it stock)
2002 GTI 1.8t, Upsolute Chipped.