fog light wiring

[Ben Missele]

Alex wrote:

> what i want to do is to now use the included wiring, but
> actually wire them with the stock foglight wires. <snip> i
want
> to be able to use the stock wires and stock switch.

 I have had a set of Catz MSC driving lights on my NX since 1998
with no problems. I cut the clip off of the stock wiring. Then,
I just wrapped the wires on the new driving lights to wires from
the car. I covered it all up with some electrical tape. Like I
said, I haven't had any problems. Also, the stock fog lights
aren't that bad to get out.

Ben
'93 NX

=====
Go Illini!