S3 cams in a Silvia SR20DET
Jay Whitely
jwhitely2000@yahoo.com
Mon, 1 Apr 2002 00:16:29 -0600
Hey guys,
I am installing JWT S3 cams into an S13 Silvia
SR20DET. The JWT intake and exhaust cams both have
short dowel pins on the ends. The Silvia intake cam
has a short dowel pin, but the exhaust cam has a
longer dowel pin that engages with the crank angle
sensor drive gear.
This dowel is similar to the alignment dowels on a
flywheel. How do I remove this dowel? It seems to be a
tight press fit and vice grips will not work. Should I
take the cam to a machine shop or place that
resurfaces flywheels?
Thanks a lot,
=====
Jay Whitely
Tampa, FL
1996 200SX SE-R
GTi-R powered, F-MAX Stage 2