Engine Electrical

[Brax Sisco]

Just went through this.  Chances are, you have a POP charger intake
which is
beating your MAF wires against the brake master cylinder and is shorting
them
out.  You can tape them up or heat shrink them, and rotate the MAF
forward,
then mount the intake more securely.  I just stuck a rag in there at
first
to make sure that it was the problem.  This seems to be common, should
probably be in the FAQ...  I forgot who helped me out on this one, but
thanks
again!

Brax

"Jeffrey A. Belmont" wrote:
> What's happening is the 10A fuse labeled "Engine ... " - 4th fuse from
> the top, left half, drivers side lower dash - Fuse (d) in the FSM] keeps
> blowing