g20/SE-R/NX2K trannies

Stewart, Joe (COX-Atlanta) Joe.Stewart@cox.com
Tue, 19 Mar 2002 10:30:42 -0600


>NX tranny into a 1993.5 G20.

>Problem he encountered was, driver side Driveshaft was too
>Short. And the G20 Driveshaft wouldnt fit.

You use the NX shaft and inner joint with the G20 outer. Works great.

This info (all of it) is in the archives.

-Jay
93.5 G20 that's had an SER and a NX tranny in it. No axle problems.