Camber settings

[John Cozine]

Assuming that you don't have camber plates or slotted struts, dial in as
much as you can get.  I could only get -0.9 degrees with stock springs and
no more than -2 with lowered springs on my '96.  The rear of course can't be
adjusted.  It's still worth it though.  Even the -1 degree made a noticeable
difference and at either setting I never had tire wear problems.

John
2002 Altima 2.5S 5sp
formerly 96 SE-R w/ stuff

> Anyone have a good number for a negative camber rate for a 96 SER that is
> both street driven and autocrossed fairly often?  Im getting the car aligned
> and would like to dial in a bit of negative camber...the tires used to