Theoretical airflow question

Ted Schmidt schmidt_fun@hotmail.com
Thu, 31 Jan 2002 11:47:21 -0600


Ok i'll admit I have tried this.  When I was removing all the excess weight
from my car I came across my air condition/heater fan.  It is a weird
circular thing with a rectangular output.  I though it would be neat to see
if shoving air into my car would give some extra hp.  Well I constructed a
adapter from a gutter collector piping.  It converted the output side from
the large rectangular to circular shape.  After this I caulked all the
cracks up and connected it up to the intake.  Also i put two shop vac
filters at the mouth of the fan to filter out big debris.  Then I extended
the original wiring to original fan switch.  This is so I could select level
1,2,3,and 4.  I never hooked up a boost gauge up too it.  But I'd guess it
maybe had about 0 psi or 1 psi.  Basically it got rid of the vacuum.  Low
rpm was not improved but top end felt more willing to pull to redline.
Never did anymore testing because I removed the fan for a ram air affect
using a prm air filter.  This setup feels just as good but is lighter and
looks much much better.

Ted Schmidt