Bench Bleed

[Lee Combs]

Sabri...

Here's how I do it.

1. Disconnect the brake lines from the M.C.
2. remove the M.C.
3. install the new M.C.
4. Take the hoses that come with the new M.C. and
place them on the appropriate fittings on the M.C.
5. Take the other end of the hose and put them in the
resovoir of the new M.C. and fill with brake fluid.
6. Pump the brake pedal until you see no more bubbles
in the resovoir.
7. Reconnect brake lines to M.C.
8. bleed the brakes. (personally, i start with the
right rear, then left rear, then rt. front then left
front.)

Hope this helps.

--- Sabri Fattah <boostinb13@hotmail.com> wrote:
> ive decided to take the challenge of changing my
> master cylinder, and i need
> to know how to do a bench bleed.