problems with clutch install

[Jay Stewart]

>to adjust the clutch cable, I had to adjust it all the way down to the
point where there was no more

This is common. You can get some more adjustment by using the slop in
the boot holes for the arm off the tranny that holds the clutch cable.
Loosen the clutch cable then loosen that arm, push it back towards the
firewall and re tighten it.

Oh, THE DISK WILL NOT FIT BACKWARDS for Gods sake. I have seen that
listed every time someone has a clutch problem for the past month.

If you are handing out advice, DON'T GUESS. Anyone can guess. Give some
useful information or be quiet.

-Jay