GTiR crank w/ FWD tranny

[Jay Whitely]

but the
> problem is that the
> flywheel from the FWD DE won't accommodate the
> larger flywheel bolts
> that the GTiR uses.

***Correct. You must use the DE flywheel with the
GTi-R bolts. You will need to take the flywheel to a
machine shop and have them bore out the holes a little
bit for the larger diameter GTi-R bolts.

You can do this yourself with a drill, but the results
are not as clean as if they are truly bored out,
rather than drilled out. This is because a drill bit
creates an uneven three-sided hole.

Also, does
> anyone know how much JWT
> motor mounts cost?

***$250 USD.

=====
Jay Whitely
Tampa, FL
1996 200SX SE-R
GTi-R motor with F-MAX kit