CV joint help!

[wc701lists at bellsouth.net]

Yup, what Eric said.  And a deep-well 14mm if you need to remove the 
sway bar (might get away without.)  1/2" square drive (end of ratchet) 
to remove the tranny drain plug, and 3/8" square for the fill, and a 
funnel.
   -wayne

On 7/13/2011 10:58 AM, Eric Waterman wrote:
> You need a 32mm for the axle nut, 17mm wrench and socket for the lower
> strut bolts and a 21mm for the wheels.  You might need a pry bar to
> remove the axle since they can be stuburn sometime.
>
> Eric Waterman
>
> On 7/13/11, Jeff Hager<submarinesammy at yahoo.com>  wrote:
>> I have a quick favor to ask. I have a B14 with a broken driver's side CV
>> joint. I have limited tools and need to know what tools I need to bring to
>> pull the axle. Does anyone know off the top of their head what tools I need
>> to bring?
>>
>> Thanks,
>> Jeff
>