Crank Position Sensor

sbaune@attbi.com sbaune@attbi.com
Fri, 18 Apr 2003 12:43:03 -0500


I talked to Dave at Fidanza about the flywheel and crank position sensor. He
says the sensor is to far away from the flywheel and not getting a good signal.
He said I need to get the factory clearance for the sensor, then try to measure
the distance. Can someone with a shop manual for the '96 SE-R, look up the
specification for the distance between the crank position sensor and the
flywheel. Once I get the info, I'll measure and try to adjust the sensor so it
will read, I'll keep everyone posted.

Thanks,

Steve Baune
'96 200SX SE-R
'99 G20t
'90 RB20DET Powered 240SX