JWT Cams/Cam gears. SR20DET settings?

[Butterglry@aol.com]

In a message dated 7/7/2002 9:32:14 PM Eastern Standard Time,
cowboydren@b15sentra.net writes:

> I've heard (!!!) that S3s were good for 30 WHP on a mostly-stock Bluebird
> DET with little more than a boost controller, but for more than that on
> a Bluebird, you need bigger injectors, a bigger MAF sensor, and a few
> other things to make power reliably.

i just redynoed my almost stock BB DET yesterday with the jwt s3's. before
the cam install i put 233hp@256ftlbs. after the cams were in i put down
258hp@261ftlbs. thats 25 hp to the wheels! keep in  mind the car leaned out
do to the stock MAF and injs, with these replaced, i might have done better.
i was running 14psi and it was about 100* outside! hope this helps.
shawn
91 classic
brilliant yellow and boostin
12.8@108 on radials
<A HREF="http://hometown.aol.com/butterglry/">http://hometown.aol.com/butterglry</A>