Will anodized aluminum carry an electrical ground?

[Wayne Cox]

At 04:02 PM 7/5/2002 -0500, EEYORE5182@aol.com wrote:
>im putting an elcetrical sending unit in an AN fitting and it needs to be
>grounded.  will the anodized aluminum carry a ground?

Probably should.  If you have a multi-tester, you can measure the
resistance between it and a known good ground.  Or flip it to voltage with
things powered up and check the the delta-V between it and ground;  should
be close to 0V if things are working.
   -Wayne