egr and bpt

George Roffe geo3@earthlink.net
Wed, 3 Jul 2002 06:31:27 -0500


Tom Paule wrote:

>Disconnect the battery, peel back the cover on the MAF connetor and splice
>into the middle wire. Ground the spliced wire onto a good, clean ground on
>the body...

Actually, the TSB is very specific about where to ground to.  You must
ground to one of the two bolts on the intake manifold, next to the TB.

And yes, it can make a difference.

George Roffe
Houston, TX
91 SE-R (well modded)
91 G20 turbo (well modded)
84 944 SCCA ITS race car under construction
<http://home.earthlink.net/~geo3/>