fog light wiring

[EEYORE5182@aol.com]

For all of those who where interested in my fog light question, heres your
answer - it works!

i as pondering the thought of using the factory fog light wires to power my
new piaas.  well, no problems yet.  so, in other words, my driving lights are
using the same factory foglight switch, they are in the place of the original
fog light locations, and still turn off when the high beams come on.

of course, there are 2 wires going to each fog light.  i didnt even need a
meter for this one.  i looked at the back of the light.  the two wires coming
going to the foglights from the stock harness are 2 colors.  one wire is
black, and one wire is multi colored.  the multi colored wire goes to
positive, and the black is negitive.  so if you cut the back of your
aftermarket wiring harness off, and attach the wires, it will work.  thats
what i did.  this way, i can still remove the lights if needed.

Alex
'93 NX2k