ECU dropping resistor install question...

[Jay Whitely]

> Hi all, i'm trying to figure out which wires to
> connect the dropping
> resistors on.

***Are you referring to the ballast resistors for ther
444cc injectors? If so, you will need to identify the
colors of the 4 signal wires for the 4 injectors. Each
injector has a signal wire from the ECU and a ground
wire. All the ground wires should be the same color.
It is just a matter of following the harness,
unwrapping a little tape, and splicing in the
resistors in series with the signal wires. I spliced
mine between the ECU main connector and the firewall grommet.

=====
Jay Whitely
Tampa, FL
1996 200SX SE-R
GTi-R powered, F-MAX Stage 2