dino 2 synth was Mixing natural and synthetic oil.

John Tumas John Tumas" <drknite@bellsouth.net
Sun, 13 Jan 2002 06:53:08 -0600


From: "Jon Pennington" <cowboydren@yahoo.com>
To: "SE-R List" <se-r@lists.deskmedia.com>
Sent: Saturday, January 12, 2002 8:44 PM
Subject: Re: dino 2 synth was Mixing natural and synthetic oil.

> But the viscosity modifier usually stays put.  The near-detergent
> properties of the synthetic exacerbated the problem to the point where
> the clumps of modifier were practically washed off the sides of the
> galleys.

   That I will not debate. Synthetic oil does clean , but not at the rate of
a professional engine flush.

> He could have at least made it home, I bet, if not for the
> switch to synthetic with old oil in the galleys.

   It was a crap shoot with the sludge in there. Even new dino oil would
have a renewed detergent package.

> Thanks for the knowledge.  I suppose that Valvoline MaxLife is very
> similar to Quaker State, but it may be a good idea to contact Valvoline
> about what seperates MaxLife from DuraBlend if somebody is contemplating
> a switch.

  The other concern is that they put extra detergent in it. If you have
sludge build-up it will dislodge it faster.
   An oil like DuraBlend has no seal swell & has less detergent in it. It's
debatable on the % of synthetic in it also. I'm betting it's mostly dino oil
, & it still has the undesirable viscosity modifiers in it.

> It's interesting to note how it pours out of the bottle, but
> what does it look/feel like when it comes out the drain plug?

   Change it out at 3,000 miles & you wont have to find out what the nasty
side effects are ;-).

    -John Tumas

   -John Tumas