Swain coating piston skirts

[Butterglry@aol.com]

In a message dated 12/27/2002 4:12:54 AM Eastern Standard Time,
jwhitely2000@yahoo.com writes:

> This equals 0.0063".  So, the bore circumference will
> increase by 0.0063".  This also means that my ring end
> gap will now start out 0.0063" wider as well.  I don't
> have my FSM handy right now....is there enough range
> in acceptable ring end gaps to cover this 0.006"

the fsm states:
ring gap top: .20-.30mm(0.0079-0.0118")   limit:1.0(0.039")
2nd:.35-.50mm(0.0138-0.0197")                limit:1.0(0.039")
oil:.20-.60mm(0.0079-0.0236")                  limit:1.0(0.039")

hope this helps
shawn
91 classic built det
91 beater w/ ac