C2 cam wear

[Raymond A. Kawski]

Jay Whitely wrote:

> The oil pressure at idle is too low to get good oiling
> during the first 20 minutes. That's why revving to
> 3000 RPM is so important during those first 20 minutes
> after the install.

When the oil is cold I usually see 40psi at idle.  Even idling
for 10 minutes or so I will still see 20psi at 900rpms.

It just makes sense *NOT* to beat the hell out of the car when
you first start it up.  Especially after installing cams.  I
usually do the break in procedure I have heard others
say they don't.

I can say turbo cars love cold engines.

RK
Turbo Oil Pressure Expert in the making