What should I use to flush the motor..

George Roffe geo3@earthlink.net
Wed, 19 Dec 2001 18:53:25 -0600


Jon, SeRNiSm0@aol.com wrote:

>What oil flushing additive do you guys suggest for my 92 se-r with mobil 1
>since I have owned the car and 130,000..Still runs very strong what you guys
>suggest?

After discussing Ajay Sharma's difficulties recently, I'd say don't
bother.  I've read a number of times of people spinning bearings right
after using engine flush.

Here's my monkey-assed guess what is going on.....

The engine is full of tiny oil passages that we normally don't
notice.  They exist in the crank, block, and rods to say the least.  Some
of them are less than 1mm in diameter.  I think some of the problems people
have had are due to the flush dislodging gunk without fully dissolving it
and it ends up clogging one of these passages.  A little oil starvation on
bearing and you're hosed.

So, now you have my guess.  Please shoot any holes you like in this.  It's
just a guess.

George Roffe
Houston, TX
91 SE-R (well modded)
91 G20  (well modded)
84 944 SCCA ITS race car under construction
<http://home.earthlink.net/~geo3/>